That used to come at a compromise on the best features to keep your recordings local. But no longer. I’ve been testing security cameras for a decade, and the gap between the best cloud-connected and local cameras is closing. Even AI detection smarts can now be found in local systems.
Rather than just listing cameras, I’m highlighting four manufacturers to consider that I've tested. I will single out a few specific cameras I like, but most brands have a wide selection of options to suit different scenarios and budgets, so I’ll discuss a few alternatives beyond my main picks. I also plan to test more hardwired systems and local recording options in the months to come. You may also be interested in how to secure your video doorbell or my recommendations for the Best Indoor Security Cameras and the Best Outdoor Security Cameras.
Updated July 2026: I added Synology as a recommended brand, added details on its encryption options, added mention of IC Realtime, and updated prices and links.
With a very wide range of reliable security cameras, Eufy (a sub-brand of Anker) is my top pick for most folks. They are easy to set up, suitable for all budgets, and support different local storage options.
If you want the most versatile and feature-packed, local security camera system, this might be it. These triple-lens cameras combine a 4K fixed main lens that has a 130-degree field of view, with dual 2K lenses that pan through 360 degrees and tilt through 70 degrees. You can zoom in on subjects or license plates more than 150 feet away. These cameras will reliably track subjects and return to fixed preset positions, and you don’t have to worry about missing anything in the usual view because of the fixed lens. There’s also a hefty, quick swap 10,000-mAh battery and a solar panel that you can screw on top or run a short distance away to better capture the sun (mine stayed charged in a dismal Scottish winter).
Features include onboard AI for reasonably accurate human, pet, and vehicle detection, configurable activity zones, and detection sensitivity controls. Each camera has 32 GB of built-in storage (expandable to 256 GB via microSD). Pair these cameras with Eufy’s HomeBase S380, and you get 16 GB of storage (expandable to 16 TB with hard drives) and local facial recognition. No AI is perfect for detection, and Eufy’s AI doesn’t quite match Google Nest’s leading cloud-based Gemini AI for accuracy, but it’s the best local option. Other weaknesses include the frame rate (capped at 15 fps), which can lead to blurry footage with fast-moving subjects, basic sound quality for two-way audio, and occasionally slow-loading feeds, especially when connecting away from home.
The Eufy S4 Max ($1,500) is a Power-over-Ethernet (PoE) wired version of this camera. The kit includes four cameras, long cables, and an NVR with 2 TB of storage (expandable to 16 TB and 16 channels). It gives you all the benefits of the wireless version, but doesn’t rely on Wi-Fi and doesn't need the solar panel, though you must run Ethernet cables to each camera.
If you’re fine with fixed cameras, I also like the EufyCam S3 Pro ($550) in a 2-cam kit with the Homebase. The Eufy Floodlight Cam E340 ($220) tops my best floodlight security cameras, and I have the dual-lens Eufy Indoor Cam S350 ($140) in my best indoor security cameras. These are some of the pricier Eufy cameras, but I have also tested and liked the Eufy C35 2-Cam Kit ($200) and the Eufy Indoor Cam E220 ($55).
After some controversy in the past over data breaches and claims about local storage, Eufy improved its security protocols with features like end-to-end encryption and better disclosures on when data is being sent to the cloud.
If local-first design and privacy are important to you, it may be worth considering Synology’s security camera range. Manufactured in Taiwan, these cameras are National Defense Authorization Act (NDAA) compliant, so they don’t use any components from certain banned (mostly Chinese) manufacturers and can be used by US federal agencies. They are relatively expensive, though, and you’ll need to run Ethernet cables to use the best Power-over-Ethernet (PoE) cameras, along with a PoE switch or injector (sold separately). This complicates the installation, but once done, a single cable provides power and a speedy, stable internet connection.
It also makes sense to pair Synology cameras with a Synology NAS device or NVR, with Surveillance Station installed. This allows you to record locally, view camera feeds (multiple views simultaneously), and record continuously. You can also tweak detection settings for people and vehicles and set restricted areas, zones, or lines. Synology’s DS Cam mobile app allows you to drop in and review video when you’re away from home. They cameras can even track and analyze occupancy, though most people won’t need this functionality.
This indoor camera comes with a handy adjustable mount that’s magnetic. It connects via Wi-Fi and has a USB-C cable for power. Video resolution goes up to 2560 x 1440 pixels with a 125-degree field of view and HDR support at 30 frames per second (fps), though you can reduce it if you want to reduce the strain on your network or NAS. The quality is excellent, and the detection is very accurate. Testing alongside the latest Google Nest Cam, the CC400W kept up just fine and offered comparable quality footage. You can also insert a microSD card for backup “Edge recording” to ensure video isn’t lost, even if your network or NAS server is unstable or goes down completely.
For a fixed outdoor camera, the BC500 is IP67-rated and comes with a standard adjustable ball socket mount. Video quality tops out at 2880 x 1620 (30 fps, HDR, 110-degree FOV), and you have the same detection and zone options as the CC400W. In the settings, you'll be able to schedule recordings, tweak cooldown periods between events, create privacy masks to avoid recording some areas, and change the streaming quality for different events or devices. I found limiting the live stream resolution for my phone helped it load far faster when I was out and about. The issue with this PoE camera is that you need to run an Ethernet cable (potentially a very long cable, depending on where you want it), and it’s going to require some drilling to install outside your home. On the plus side, there’s no need to worry about charging. Black-and-white night vision is good and stretches up to 30 meters.
I also tried the TC500 turret camera, which is similar to the BC500, just with a different physical design, and the FC600 fish-eye camera, which is probably more suitable for store owners installing a camera on the ceiling to cover a wide area.
Synology setups are slightly complicated by the licensing. You get two camera licenses with most Synology NAS devices and four with the NVR, meaning you can use two or four cameras. Extra licenses cost $56 for one, or you can get a 4-Pack for $227 or an 8-Pack for $413. The BC500 and TC500 both come with licenses, but you can buy them slightly cheaper without licenses, as the BC510 and TC510, and use them with any other system that supports the Open Network Video Interface Forum (ONVIF) protocol.
The Tapo line from TP-Link is my budget-conscious pick, because these are some of the best quality local-recording cameras you can get without spending much. But TP-Link faces a potential US ban because of claims about its networking gear (routers), though such a ban would likely not include its Tapo cameras. Tapo cameras also lack proper end-to-end encryption.
This camera offers value, and I love the magnetic mount for easy adjustment and removal when you need to charge. It supports video at up to 2K and 30 frames per second, has a 150-degree field of view, and records locally on a microSD card (up to 512 GB). It connects directly to Wi-Fi and the feed generally loads within a few seconds in the Tapo app, where you’ll also find configurable privacy zones and activity zones. Detection is solid, and it can mostly tell the difference between people, pets, and vehicles. If you don’t want to worry about charging it every couple of months, snag a solar panel. There’s also a two-cam kit that comes with a small indoor hub with a microSD card slot.
On the downside, it lacks HDR, so direct bright sunshine can make it tricky to see bright areas clearly (it will be fine in a shady spot). It’s annoying that the rich notifications with snapshots and the video filtering require a subscription, but you don’t need them. If you want higher-res video, the Tapo MagCam 4K Solar ($120) boosts the resolution to 4K and comes with a solar panel, though its frame rate is limited to 15.
If you're looking for a pan-and-tilt outdoor camera, consider the Tapo C660 ($170) or the HybridCam Duo C246D ($70). If you can run a power cable, I like the Tapo C325WB ($71). If you want an indoor camera, the TP-Link Tapo C120 is my top pick, though the even cheaper C110 is also good. For a panning camera to cover a wider area, I like the Tapo C225 ($42), or maybe the C216 ($36).
One of the big selling points for Aqara’s devices is the support for Apple’s HomeKit Secure Video. Aqara also makes a ton of smart home sensors and gadgets, and some of its cameras boast features and connectivity that can help your smart home perform better. On the downside, Aqara’s app is confusing and buggy, though you can largely bypass it if you use Apple’s HSV or Home Assistant.
While up to 2K at 20 frames per second and a 133-degree field of view doesn’t sound great, this camera has a big image sensor, so it produces rich video and has impressive color night vision. The basics are solid, with AI detection that can divide subjects into people, vehicles, animals, and packages with few mistakes.
The real reason to consider it is that the camera doubles as a Matter controller and Thread border router. If you’re sick of your robot mower or outdoor smart lighting struggling to stay connected or they’re not as responsive to commands as you’d like, this camera can help. It can also work as a Zigbee hub for Aqara devices, and it continues to work, even when your Wi-Fi goes down. There are Wi-Fi and PoE versions of this camera. Support for Real-Time Streaming Protocol (RTSP) makes it easy to use with a third-party client on your NAS or with Home Assistant.
On the downside, Aqara’s app is sprawling and rough around the edges. It will likely take some tinkering to get it set up the way you want, and features like event filtering, SMS or email notifications, and video sharing require a subscription. If you do want to use HSV, you also need a HomeKit hub, such as a HomePod Mini or Apple TV, and an iCloud storage plan. But none of this is essential.
For indoors, the pan and tilt Camera Hub G3 is worth a look, and if you just want something basic, the Aqara Camera G100 ($40) is very affordable.
I also recently tested some IC Realtime gear, including the IPMX-E40F-W2 ($492) and IPFX-D80V-IRW3 ($858) dome cameras, a large bullet camera, and a video doorbell. These cameras are excellent, with onboard AI detection, and they offer a highly secure, local recording system when paired with the NVR. But they are also very pricey and probably overkill for most regular homes. You can pick up certain models at Amazon or Best Buy, but they mostly sell through distributors and resellers.
I have excluded brands that require cloud connections, such as Google’s Nest (cloud-only) and Arlo (local option for backup only). I also decided not to include brands that only offer certain important features with subscriptions, such as Amazon’s Blink and Wyze. Other brands like Reolink, Ezviz, Lorex, Swann, Imilab, Baseus, Annke, and Safemo didn’t make the cut for several reasons, including video quality or performance that failed to match our picks above, quirky or buggy apps, and failure to alert for every event.
Note: I have repeatedly requested review units from UniFi (Ubiquiti) and would love to test some of its cameras.
Power up with unlimited access to WIRED. Get best-in-class reporting and exclusive subscriber content that's too important to ignore. Subscribe Today.
Source: Wired — This article was automatically imported from the source. Read full article at original source →
